Bronze Valves

• Bajaj Bronze Spare Cones Fusible Plugs
• IBR Certified
• Two Piece Design Tested 500 PSIG.

BAJAJ Fusible Plug (Loco Type) IBR

Bajaj Bronze Fusible Plug (Loco Type) IBR Certified screwed end to BSP taper male thread Max. BOP 250 PSIG at Max. temp 220C tested to 500 PSIG Hyd.

• Bajaj Bronze Fusible Plug IBR Certified
• Two piece design
• suitable for 100 psig. to 250 psig.
• Screwed male ends BSP Taper
• Tested to 500 psig. Hyd.

• Bajaj Bronze Sleeve Packed Water Level Gauge IBR Certified
• Flanged ends to B.S. 10 Table H with automatic  shut off in the water arm RH/LH operated Tested  to 500 psig. Hyd.Max. temp. 428F (220 C) Max.  BOP 250 psig.

• Bajaj Bronze Inspector Test Gauge-Cock
• IBR Certified with bend BSW inspector gauge connector Max. BOP
• 250 PSIG at Max. temp 22C tested to 500 PSIG Hyd.

• Bajaj Bronze Vertical Lift Check Valve
• Two Piece Design IBR Certified
• With 13% Cr. S.S. (AISI-410) trim Screwed  female ends Max. WP 250 psig.
• Max. temp. 428F (220C)
• Tested to 500 psig. Hyd.

• Bajaj Bronze Vertical Non Return Lift Check Valve
• Two Piece  IBR Certified
• With Renewable Stainless Steel Seat & Ring
• Flanged end To BS-10 Table H suitable for
• steam lines up to 250 PSIG At Max working
• temp 428F (220 C) tested to 500 PSIG Hyd.

• Bajaj Bronze Combined Cock & Feed
• Check Valve IBR Certified
• Flanged ends. Flanges to B.S. 10 Table F.
• Max. BOP 150 psig.
• Max. temp. 428F (220C)
• Tested to 300 psig. Hyd.

BAJAJ Controllable Feed Check Valve

Bajaj Bronze Controllable Feed Check Valve

Right Angle or Straight type (IBR Certified) with back seat arrangement renewable S.S. parts  (AISI-410) Trim parts Flanged ends tested to
500 psig HYD. hand wheel operated steam lines suitable for  Saturated steam BOP up to 250 PSIG at Max working Temp 428F Tested to BS-10 Table H

• Bajaj Bronze Controllable Feed Check Valve IBR Certified.
• Right Angle or Straight type pattern screwed o/s and yoke type rising stem with back seat  arrangement renewable
• S.S. (AISI-410) Trim parts Screwed Female ends  hand wheel  operated  steam lines suitable for Saturated steam
• BOP up  to 250 PSIG at Max working Temp 220F Tested to 500 PSIG Hyd.

• Bajaj Bronze Accessible Feed Check
• Valve IBR Certified
• Straight /Curved Inlet Angle Pattern bolted bonnet ,
• SS(AISI 410)Trim & Stem Flanged ends to BS:10
• Table H, Hand Wheel Operated Suitable for W.P. 250 psig.
• Max. at  Steam temp. 220CC (428F) Hyd.Tested 500 psig.

Features

• Bajaj Bronze Spring Loaded Pop Type Safety
• Valve (High Lift) IBR Certified
• Enclosed Discharge Flanged End to BS-10
• Table 'F' Set Pressure 150 PSIG, Max. Working
• Temp 428F (220C) Tested to 300 PSIG Hyd.

Features

• Bajaj Bronze Spring Loaded Pop Type Safety Valve (Open/Enclosed Discharge) IBR Certified
• Screwed male inlet BSPT Thread & female outlet
• BSP Max. Set pressure 250 psig. And Max. Temp 428F (220C)

• Bajaj Bronze Spring Loaded Pop Type Safety
• Valve (Open/Enclosed Discharge) IBR Certified
• Flanged ends to BS:10 Table H Max.
• Set pressure 250 psig. And Max. temp 428^oF (220^oC)

Our deep-rooted corporation is engrossed in manufacturing, exporting and supplying an outstanding variety of Bronze Gate Valve to our esteemed clients. Used for controlling the fluid flow, these valves find application in thermal power, oil and gas industries. Manufactures in compliance with ISO 9001:2000 standards, this Bronze Gate Valve are available in various sizes as to fulfill the requirement of our clients.

Features

• High tolerance
• Excellent finish
• Low friction

Our company is one of the progressive & prominent manufacturers, suppliers and exporters of excellent quality Feed Check Valve. These valves are manufactured by our skilled manpower using high grade metal and modern machines. We offer these check valves in various specifications and sizes ranging from 25mm to 50mm. The entire range of Feed Check Valve is extensively used in varied industries of oil, food and chemical.

Features

• Hand Wheel Operated
• Scratch Resistant
• Highly Reliable

Bajaj Bronze Fusible Plug IBR Certified

Single Piece / Two Piece Design
Screwed Male BSP Taper End

Max. B.O.P. 100 psig. & 250 psig at 220^oC Temp.
Hyd. Tested 500 psig.
Size 15 mm to 50 mm.

Committed to ensure smooth workflow in our entire business operation, we are considered as the most experienced manufacturer, supplier and exporter of Horizontal Lift Check Valves.  Our offered range of valves is wisely manufactured, lapped and screwed in seat in order to ensure tight shut-off. These check valves are ideal to reduce flow resistance and pressure drop to the minimum possible level. Our expert quality analyzers duly check these Horizontal Lift Check Valves on various quality norms before supplying to clients.

Features

• Rust Resistant
• Longer life
• Dimensional stability

Since our inception in 1967, our corporation has gained a huge recognition in the market as the top most manufacturer, exporter and supplier of Bronze Spring Valve. Light in weight and easy to install, these valves ensure excellent performance in various industrial systems. We make available these valves to our clients in different size range and pressure rating. Further, our Bronze Spring Valve is suitable for better flow management.

Features

• Sleek design
• Leak proof
  
• Smooth finishing

Bronze Spring Valve 

Bajaj Bronze Sprign Loaded Safety Relief Valves

Open Discharge / Enclosed Discharge (Oridinary Lit) Screwed Male Inlet

• Hyd. Tested 300 psig.
• Max. W. Temp. 220^oC
• Size 15 mm to 50 mm.

Incorporated with modern features as per industrial standards and requirements, we manufacture, supply and export a wide range of Bronze Globe Steam Stop Valves. Manufactured as per industrial standards using supreme quality bronze and innovative technology, these valves are demanded in construction and engineering industries. Apart from this, we are committed to offer these Bronze Globe Steam Stop Valves to our clients within specified time frame.

Features

• Easy Installation
• Robust Construction
• Easy to open & shut off
  

Bajaj Bronze Globe Steam Stop Valves IBR Certified

Scrwed Female Ends / Flanged Ends
To BS: 10 Table 'H"
Screwed for Bonnet S.S. (AISI - 410) Trim Parts
Inside Screw, Rising Stem.

Screwed Sie: 8 mm to 50 mm
Flanged Size: 15 mm to 50 mm
Max. W.P. 250 psig. at 220^oC Temp.
Hyd. Tested: 500 psig.

Holding years of experience and knowledge in this industry, our company has been able to mark its strong presence in the market as one of the profound manufacturers and exporters of Bronze Horizontal Lift Check Valves. Our offered lift check valves are commonly used in industrial fittings, suitable for wide range of fluid applications. To offer flawless range to our clients, we stringently check these Bronze Horizontal Lift Check Valves on various quality norms.

Features

• Corrosion resistant
  
• Leak proof structure
  
• Sturdy design
  

We have carved a niche in the industry for manufacturing and exporting a wide range of Bronze Safety Valves with dual control rings. These valves are mostly used for controlling the flow of different materials and are precisely checked by our experts in terms of pressure seating blow down and leakage. We manufacture these Bronze Safety Valves using premium quality bronze sourced from the reliable vendors of the market.

Features

• Properly sealed to prevent disassembly
• Reduces sliding area and friction
• Easy to adjust for opening and exact blow down control

As an uprising organization, we are manufacturing, exporting and supplying a quality range of Bronze Vertical Lift Check Valves to fulfill the requirements of our clients. Our offered lift check valves are manufactured at our well-equipped manufacturing unit using certified grade metals. Find usage in sugar, petroleum, oil, chemical, gas, paper and rubber industries, these Bronze Vertical Lift Check Valves are suitable for regulating and controlling the flow of liquid.  

Features

• Leak proof
  
• Sturdy design
  
• Easy to open & shut off 
  

Bajaj Bronze Vertical Lift Check Valves IBR Certified (Two Piece Design)

Screwed Female Ends / Flanged Ends
S.S. (AISI - 410) Trim Parts

Max. W.P. 250 psig. at 220^oC temp.
Hyd. Tested 500 psig.
Size: 15 mm to 50 mm.

With the help of our distinguished professionals, our company has been able to mark its strong presence in the market as one of the well known manufacturers & exporters of Bronze Globe Valves. These globe valves are used for regulating the flow in a pipeline. We have with us expert quality controllers, who stringently check these Bronze Globe Valves on various quality norms to offer flawless delivery at client's end.  

Features

• Dimensionally accurate
• Quite & easy to open and shut off
  
• Rust proof coating  

Bajaj ronze Union Bonnet Globe Valves

• With Renewabel S.S. (AISI 410) Stem &
• Trim Parts, Screwed Female Ends / Flanged Ends
• To BS: 10 Table 'F'
  

Hyd. Tested 500 psig.
Size Range 15 mm to 80 mm.

Driven by a desire to mark our noteworthy position in the competitive market, we are known to be the prominent supplier and manufacturer of a wide assortment of Bronze Y-Type Strainer. Precisely manufactured by experienced team members with the aid of latest technology, our optimum quality of strainers are mostly used across pneumatic and hydraulic systems. This Bronze Y-Type Strainer is available in various sizes ranging from 15 mm to 50 mm to meet the requirements of our clients.

Features

• Minimum pressure drop
• Easy maintenance
• Trouble free performance

With Stainless Steel (AISI 304) Screen
Screwed Female Ends / Flanged Ends
To BS: 10 Table 'H'

Max. W.P.  250 psig. at 220^oC Temp.
Hyd. Tested 500 psig.
Size 15 mm to 50 mm.

With vast industry experience, we have been able to manufacture, supply and export a quality stock of Bronze Water Level Gauge. Designed using high quality bronze, these gauges comply with the industry norms and standards. Available in various sizes and dimensions, these water level gauges are used in various industries like petroleum, oil and chemical for detecting the level of water in the system. Our team of quality analyzers checks the quality of this Bronze Water Level Gauge on various parameters before dispatching to the clients end. 

Features

• Accurate detection
  
• Sturdy structure
• Automatic shut off

Bronze Water Level Gauge 

Bajaj Bronze Sleeve Packed Water Level Gauge IBR Certified
Screwed / Flanged Ends.
Right / Left Hand Operated To BS; 10 Table 'H'

Max. B.O.P. 250 psig. at 220^oC Temp.
Hyd. Tested 500 psig.
Size: 15 nmm to 20 mm.